The following text may have been generated by Optical Character Recognition, with varying degrees of accuracy. Reader beware!

12 Ship Modelers Log CHEESECLOTH SWAB # SANDED LIGHTLY AND INSTALLED To obtain a "tarred deck" for your scale model, begin by cutting basswood or other close-grained wood to desired scale widths. Length of strips do not matter at this point for you will cut odd lengths for staggering planks at installation. Next stack a number of "planks" on end and secure together in the manner shown in sketch. Roll a piece of cheesecloth around dowel to use as an ink swab applicator. Do not soak cloth completely when applying ink or the results will require excessive sanding at assembly of the completed deck. When "planks" are coated on both edges, allow to dry* Using your favorite wood glue, assemble over plan view of deck outline, being careful all seams are glued tightlyo After completely dry, use light grade of sand paper to remove excess "tar" and install in model. See the above sketches. If desired, you may apply a coat of clear laquer then sand lightly for a more permanent finish.