The following text may have been generated by Optical Character Recognition, with varying degrees of accuracy. Reader beware!

VOL. 36 CLEVELAND OCTOBER 17, 1907. NEW YORK { Ton and Larger Sizes Made with Double Load Chains as above "CYCLONE" High Speed Chain Hoist WITH SELF-LUBRICATING BEARINGS | High Efficiency, High Speed, Great Durability ALL GEARS CUT The Bearings of the Hoist have GRAPHITE BRONZE BUSHINGS. They are self-lubricating, they require no oil, and will run indefinitely without cutting. These Hoists will raise a load of two tons toa height of one foot with a pull of 125 lbs. while overhauling only 39% feet of hand chain. As you would have to overhaul at least 90 feet of hand chain to do the same work on the best Screw Hoists, it is plain that the CYCLONE is more ' than twice as fast. It can be geared toa higher speed than any other hoist with no greater hand wheel pull. There is the least possible fric- tion loss, the efficiency averaging nearly 80 per cent. When there is no load the hand wheel may be spun in either direction. When the hand chain is released the Automatic Brake immediately locks the block so that the load is safely held atany point. Itmay be readily low- ered, however, by areverse pull on the hand chain. SEND FOR COMPLETE ILLUSTRATED CATALOG THE CHISHOLM & MOORE MFG. CO. CLEVELAND, OHIO JAMES L. NEEFUS, 103 Reade St., Agent for New York City % Ton and i Ton Sizes Made with Single Load Chain, as above No. 16